Izici

1. Isilinganiso sokudlulisa samanje(CTR) : MIN. 20% (ku-IF = ±1mA, VCE = 5V, Ta=25 ℃)
2. High input-output isolation voltage.(VISO=3,750Vrms)
3. BVCEO = 80V(MIN)
4. Izinga lokushisa elisebenzayo:-55℃ ukuya ku-125℃
5. Ngokuhambisana ne-RoHS, REACH amazinga
6. ESD idlule HBM 8000V/MM 2000V
7. Imvume yokuphepha
8. I-UL igunyaziwe (No.E323844)
9. i-VDE ivunyiwe (No.40029733)
10. Ikilasi le-MSL Ⅰ

 

Imiyalo

Uchungechunge lwe-OR-3H4-4 luqukethe idivayisi yeziteshi ezine ipheya ngayinye iqukethe amaledi amabili e-infrared kanye nomtshina wesithombe esishintshashintshayo.

Afakwe ku-SOP enamaphini angu-16, angenawo ama-halogen kanye ne-Sb2O3

 

Ibanga Lohlelo

1. Ama-substrates ayi-Hybrid adinga ukukhweza ukuminyana okuphezulu
2. Isilawuli esingahleleleka
3. Izisetshenziswa zesistimu,izinsimbi zokulinganisa

 

Inani Elilinganiselwe Eliphelele Eliphelele (Izinga lokushisa Elivamile=25℃)

Ipharamitha		Uphawu	Inani Elilinganiselwe	Iyunithi
Okokufaka	Dlulisa Okwamanje	IF	50	mA
	Khuphuka phambili okwamanje(t=10us)	IFM	1	A
	Reverse Voltage	I-VR	6	V
	Ukuchithwa kwamandla	P	65	mW
	I-Junction Temperature	Tj	125	℃
Okukhiphayo	Umqoqi kanye ne-emitter Voltage	VCEO	80	V
	I-Emitter kanye nomqoqi Voltage	VECO	7
	Umqoqi Wamanje	IC	50	mA
	Ukuchithwa kwamandla	I-PC	150	mW
	I-Junction Temperature	Tj	125	℃
Isamba Sokushabalaliswa kwamandla		I-Ptot	200	mW
*1 I-Insulation Voltage		I-Viso	3750	Vrms
Izinga Lokushisa Lokusebenza		Topr	-55 ukuze +125	℃
Izinga Lokushisa Lesitoreji		Tstg	-55 ukuze +150
*2 I-Soldering Temperature		Tsol	260

*1. I-AC Iminithi elingu-1, R.H. = 40 ~ 60%

 

I-voltage yokuhlukanisa izolinganiswa kusetshenziswa indlela elandelayo.

1. Ifushane phakathi kwe-anode ne-cathode ohlangothini oluyinhloko naphakathi komqoqi kanye ne-emitter ohlangothini lwesibili.
2. Isihloli se-voltage esihlukanisayo esinomjikelezo oyiziro-cross sizosetshenziswa.
3. I-waveform ye-voltage esetshenzisiwe izoba i-sine wave.

*2.soldering isikhathi imizuzwana 10.

 

Izimpawu ze-Opto-electronic(Ithempelesha Elivamile=25℃)

Ipharamitha		Uphawu	Okuncane	Uhlobo.*	Max	Iyunithi	Isimo
Okokufaka	Phambili I-Voltage	VF	---	1.2	1.4	V	IF=±20mA
	Amandla etheminali	Ct	---	60	---	pF	V=0, f=1KHz
Okukhiphayo	Umqoqi Obumnyama Bamanje	ICEO	---	---	100	nA	VCE=20V,IF=0mA
	I-Voltage Yokuhlukana Kwe-Collector-Emitter	BVCEO	80	---	---	V	IC=0.1mA IF=0mA
	I-Emitter-Collector Breakdown Voltage	BVECO	7	---	---	V	IE=0.1mA IF=0mA
	*1 Isilinganiso Samanje Sokudlulisa	CTR	20	---	400	%	IF=±1mA VCE=5V
	Umqoqi Wamanje	IC	2	---	40	mA
Ukuguqula Izimpawu	I-Collector-Emitter Saturation Voltage	VCE(sat)	---	---	0.3	V	IF=±8mAIC= 2.4mA
	I-Insulation Impedance	Riso	5×1010	1×1011	---	Ω	DC 500V 40~60%R.H.
	Amandla Okuntanta	Cf	---	0.8	1	pF	V=0, f=1MHz
	Isikhathi sokuphendula	tr	---	3	18	μs	VCE=10V, IC=2mA, RL=100Ω, f=100Hz
	Isikhathi Sokwehla	tf	---	4	18	μs

• Isilinganiso samanje sokuguqulwa = IC / IF × 100%

 

Ithebula lezinga lesilinganiso sokudlulisa samanje CTR

INOMBOLO YOMBONELO.	Izinga le-CTR	Okuncane.	Ubukhulu.	Isimo	Iyunithi
NOMA-3H4-4	CHA imaki	20	400	IF=±1mA, VCE=5V, Ta=25℃	%
	A5	100	300
	B3	150	300	IF=±5mA, VCE=5V, Ta=25℃
	GB	100	400	IF=±5mA, VCE=5V, Ta=25℃

• Isilinganiso samanje sokuguqulwa = IC / IF × 100%

 

Ulwazi Lwe-oda

Inombolo Yengxenye

NOMA-3H4-4X-W-Y-Z

Qaphela

X = Isikhundla se-CTR (A5 , B3 , GB noma none) W = Inketho ye-tape ne-reel (TA noma TA1).

Y = ‘V’ ikhodi yokuphepha kwe-VDE (Lokhu okukhethwa kukho akudingekile).

Z = ‘G’ ikhodi ye-Halogen mahhala .

* VDE Ikhodi ingakhethwa.

Inketho	Incazelo	Inani lokupakisha
TA	Ifomu lokuhola lokukhweza okungaphezulu (iphrofayela ephansi) + inketho ye-TA tape & reel	2000 amayunithi esondweni ngalinye
TA1	Ifomu lokuhola lokukhweza okungaphezulu (iphrofayili ephansi) + inketho ye-TA1 yetheyiphu & ne-reel	2000 amayunithi esondweni ngalinye

 

Umthetho Wokuqamba

1. Umkhiqizi : ORIENT.
2. Inombolo Yengxenye : 3H4-4.
3. Ikhodi Yezinga : I-CTR Isikhundla
4. Ikhodi Yonyaka ： '21' isho '2021' nokunye.
5. Ikhodi Yeviki : 01 isho isonto lokuqala, i-02 isho isonto lesibili njalonjalo.
6. Ikhodi ye-VDE . (Uma uthanda)
7. G : I-Halogen Mahhala.
8. i-Anode.

VDE Umaki angakhethwa.

 

I-Outer Dimension

 

Amaphethini Okuphrinta Onyawo Anconyiwe (I-Mount Pad) (Iyunithi:mm)

 

Ukuthepha Ubukhulu

(1) NOMA-3H4-4-TA1

(2) NOMA-3H4-4-TA

thayipha	Uphawu	Ubukhulu: mm (in.)
umkhawulokudonsa	W	16±0.3 (0.47)
phakamisa	P0	4±0.1 (0.15)
pitch	F	7.5±0.1 (0.217)
	P2	2±0.1 (0.079)
isikhawu	P1	12±0.1 (0.315)

Uhlobo lwe-encapsulation	TA1/TA
Ubuningi (izingcezu)	2000

 

ubukhulu bephakheji

Ulwazi Lokupakisha
Uhlobo lokupakisha	Uhlobo lwe-reel
Ububanzi bethephu	16mm
IQty ngeReel	2,000pcs
Ibhokisi elincane (ingaphakathi) Ubukhulu	345*345*58.5mm
Ibhokisi elikhulu (Outer) Dimension	620x360x360mm
Max qty ngebhokisi elincane	4,000pcs
Max qty ngebhokisi elikhulu	40,000pcs

 

Isampula Yelebula Yokupakisha

Qaphela:

1. Ikhodi Yento :I-ID yomkhiqizo.
2. P/N :Okuqukethwe kokuthi "Ulwazi Lwe-oda" emibhalweni.
3. Inombolo Yeningi :Idatha yomkhiqizo.
4. D/C :Amaviki omkhiqizo.
5. Ubuningi :Inani lokupakisha.
6. Ukuhlolwa Kokwethembeka

 

Iphrofayili Yezinga Lokushisa Yokusoda

I-IR Reflow soldering (ithobela i-JEDEC-STD-020C)

Ukugeleza kwe-solder ngesikhathi esisodwa kuyanconywa ngaphakathi kwesimo sezinga lokushisa nephrofayili yesikhathi eboniswe ngezansi. Ungadayisi ngaphezu kwezikhathi ezintathu.

Into yephrofayela	Izimo
Ukushisa kuqala I-Temperature Min (T Smin ) Temperature Max (T Smax ) - Isikhathi (iminithi ukuya kubukhulu) (ts)	150˚C200˚C90±30 isekhondi
Indawo yokunamathisela- Ithempelesha (TL )- Isikhathi (t L )	217˚C60 isekhondi
Izinga Lokushisa Eliphakeme	260˚C
Isikhathi Sezinga Lokushisa Eliphakeme	20 isekhondi
Izinga lokukhuphuka	3˚C / sec ubuningi.
Izinga lokuya phansi ukusuka kuzinga lokushisa eliphakeme	3~6˚C / isekhondi
Izikhathi zokugeleza kabusha	≤3

I-Wave soldering (i-JEDEC22A111 iyahambisana)

I-solder yesikhathi esisodwa iyanconywa ngaphakathi kwesimo sezinga lokushisa.

TemperatureTime	260+0/-5˚C10 isekhondi
Ukushisa kwangaphambi kokushisaIsikhathi sokushisa	25 kuya ku-140˚C30 kuya ku-80 isekhondi

I-soldering yesandla nge-soldering iron

Vumela ukuthengiswa komthofu okukodwa kuyo yonke inqubo eyodwa. Kunconywa i-solder ngesikhathi esisodwa.

Izinga lokushisa

380+0/-5˚C

Isikhathi

3 amasekhondi ubuningi

1．Ijika Lezimpawu